| dc.description.abstract | Total energy requirement and specific energy consumption for drying of onion slices
were evaluated using various drying methods including hot-air convection, infrared
radiation and hot air convection-infrared combination drying. Onion slices with initial
moisture content of 7.31 g water/g dry solids, were dried to a final moisture content of
0.07 g water/g dry solids. Energy and specific energy consumption under the different
drying conditions of the onion slices were compared. In particular, the experiments
were carried out in convective dryer at three air temperature levels of 50, 60 and 70 oC
and three air velocity levels of 0.5, 1.0 and 2.0 m/s. Experiments in the infrared dryer
were done at three air velocity of 0.5, 0.7 and 1.0 m/s. For combination of infrared and
hot-air convection drying, there were three air temperature levels of 40, 50 and 60 oC
and three air velocity levels 0.5, 0.7 and 1 m/s while the infrared intensity was set at
0.15, 0.20 and 0.30 W/cm2. Results of data analysis showed that the lowest and highest
energy consumption levels in drying onion slices were associated with the hot air
convection-infrared combination (IR-HA) and convection (HA) dryers, respectively.
Specific energy consumption in the hot air dryer showed a downward trend with
increasing air temperature and an upward trend with increasing air velocity. In infrared
(IR) drying, it was observed that increasing the air velocity increases the drying time
and consequently the amount of energy consumed. However, a reduction in energy IRHA
was noted with increasing infrared intensities under combination drying relative to
infrared drying alone. Therefore, IR-HA drying of onion slices proved to have the
lowest specific energy consumption and therefore the most efficient. | en_US |
